All Terrain Vehicle Product Tests ATV Technical Magazine



Test Platform:
2010 Polaris Rzr 4


COBRA UTV Windshields by PowerMadd
Part # PM20202

  • This 1/2 shield has a unique style and is designed to push air and dust up and over the riders. 
  • Cobra shields are made from premium, optical-grade polycarbonate. 
  • Windshields have a brilliant surface, and provide distortion-free viewing. 
  • PowerMadd use 0.80" thick material for amore durable, longer lasting shield.
  • Self-sticking windshield pucks give the center of shield more stability.
  • Securely mounts to your UTV using role bar mounting straps.
  • Comes in 2 models: PM20201 - Clear (10") & PM20202 - Tint (10")


Note: Installation is using the tinted model, but both models are installed exactly the same way. The only difference is the tint versus no tint.

Pic #1

Pic #2

Pic #3

Pic #4

  • Note: PowerMadd Cobra Windshield is attached with roll-bar clamps and use self sticking windshield pucks to give the center of the shield more stability.
  • First decide where you want to install your windshield as shown in pictures # 1 above.
  • Position your Cobra windshield in place and install the 4 supplied roll-bar clamps loosely as shown in picture # 2.
  • Note: The self sticking windshield pucks go between the windshield and the dash, which gives the center of the shield more stability as shown in the pictures above.
  • Finish your set up by tightening all 4 clamps, but be careful to not over tighten.
  • Pictures #2,# 3, & # 4 show the PowerMadd Cobra UTV Windshield installed.


My Impressions:

Available in tint or clear.

Sporty in design but very functional.

Made from premium, 0.80" thick, optical-grade polycarbonate.

1/2 shield is designed to push air and dust up and over the riders.

Windshield is easy to clean and is priced right.


Bottom Line:
When we received our Polaris Rzr 4 for long term review the weather was still a bit on the brisk side, and I wanted to ride without getting to much cold air in my face. We had several options from the full windshield to a half windshield to choose from in the Polaris Accessories catalog but we decided to go a different route this time.  Having used the Cobra Windshields from PowerMadd on our sleds I decided to try one of their 1/2 windshields on the new Polaris Rzr 4.

Like their sled windshields the UTV Windshields are very easy to install. Just line up the windshield where you want it, attach your 4 roll-bar clamps loosely, position your windshield pucks, & tighten your roll-bar clamps. It took me all of 15 minutes to install, and can be done by anyone that can operate a screwdriver.

I like the way the windshield gives you an on-obstructed view over the hood, but also gives you adequate protection from the wind at the same time. This is the way I like to ride, and this windshield does it's job very well due to it's special flared design.

Cleaning your windshield is done like anything else and should be done with care so as not to scratch your windshield. I wash mine off when I wash my machines and I use the same care as I do for cleaning my helmets shields. Do this and your windshield will last, and it will retain that optical-grade distortion-free viewing for a long time.

The bottom line is if you want to install a quality windshield on your UTV, you have options, and one of them is the PowerMadd Cobra UTV Windshield. I have been using PowerMadd products on my atv's, snowmobiles, and now my UTV's, and I highly recommend them.


Contact Info:
5190 260th Street
Wyoming, MN 55092

Phone: 651-925-4144
Toll Free: 800-435-6881
Fax: 951-925-4145
How to purchase PowerMadd Products: