ATVPT | All Terrain Vehicle Product Tests ATV Technical Magazine

ATV CVT- Carb Snorkel Mods

ATV Carburator Tech Tips

ATV CVT Belt Tech Tips

ATV Lighting

http://www.atvpt.com/ledmod.htm

BRP Outlander 800 XT CVT Belt Replacement

BRP Outlander 800 XT CVT Drain Hole Position

ATV CVT Belt Installation

Carlisle UltimaxATV has a nice installation section on how to remove and replace a CVT Belt correctly.

EFI - THE 411 ON HOW IT WORKS

EFI-The 411 on how it works

Elka Springs Installation

Elka Springs

HMF Recommended ReJetting Settings

Re-jetting the 650 Kawasaki Prairie's Carbs using Keihin Type Round Jets

Kawsasaki Prairie Belt Light Reset Procedure

Kawasaki Prairie Belt Light Reset Procedure

KEBC Fork Removal for better launchs!

Kawasaki KEBC CVT Clutch Fork Removal

Kawasaki Prairie KEBC Actuator Removal & Flashing 2/4 Light Wiring By Pass

Kawasaki Prairie Oil Filter Cross Reference

Shimming the Carburetor Needles on the Kawasaki Prairie

Swing Arm Bearing Replacement

Machines: - Suzuki Twin Peaks 700, also similar: Kawasaki Prairie 300,360,400,650,700, V-Force 700
Submitted By: - Jody Robinson (JR)
http://www.atvpt.com/ttswingarm.htm

Spark Plug Facts

Check out the www.atvptforum.com for more Tech Tips, and maybe share a tech tip while you are there.
These tech tips are here for you and everybody that can use them. Hopefully they will help you to work on your machines easier.
Good luck.