www.ATVPT.com

Features:

• CNC machined out of billet steel.
• Add 1-1/2" total spacing.
• Useful when installing Big Wheel Kits or oversized tires.
• 1 P/N needed per axle (1 P/N contains 8 spacers).
• 10 x 1.25mm (most ATVs).

Installed Views:





                  

My Impressions:

Pros:
Wheel spacers will fit any 10 mm wheel stud.

Available for most utility & utv applications.

True 1 1/2" spacing.

New wider, flat mounting area for better fitment to wheel.

Cons:
None yet.

Bottom Line:
Once again we looked to QuadBoss for assistance with a build dilemma. We had a set of wheels that were for another machine, but had the incorrect wheel offset for our KYMCO UXV 500.

When we installed them the insides of the wheel rubbed on the brake calipers, which was not good. The KYMCO is so new there are no standard wheel spacers readily available for it yet? My solution was to go to QuadBoss and get one of their Universal Wheel Spacer kits. Bare in mind if you are going to do both the front and the rear wheels you will need two kits.

The QuadBoss Unversal Wheels Sapcers come in size's to fit any 10mm wheel stud application. So this kit will work on most atv's or UTV's with the 10mm studs.

QuadBoss has designed their Universal Wheel Spacers with a wide, flat mounting surface, that makes for a more solid mounting surface for your wheel.

In our case we had to use wheel spacers to allow our wheels to work correctly, and provide a safer ride. If you would like a wider stance for your ride and do not want to purchase new wheels with a different offset, then wheel spacers are the way to go.

So, if you want to get your wheels and tires out a little farther, I would highly suggest talking to your local QuadBoss Dealer to see if he can order you a set of the new QuadBoss Universal Wheel Spacers.