OptiMate 3
Desulfater-Charger features:
As simple as 1-2-3.
Just connect the OptiMate to your battery and the
6 stage program does the rest automatically and safely.
Diagnoses & desulfates
batteries safely.
Suitable for all types of
12V lead-acid batteries.
Maintains your battery
automatically for months.
How it works:
Hook up the battery and OptiMate immediately checks if the
battery is sulfated or not.
If it is OptiMate applies ‘first aid’ in the form of a voltage
of up to 20V** at low current for up to 2 hours, to
recover the battery so it can again accept a charge.
It then ‘bulk’ (constant current) charges the battery, the
starting stage if no sulfation was detected.
There-after the unique ‘verification’ (pulsing charge &
check) stage provides low voltage desulfating care and tops off the charge.
OptiMate then tests & confirms whether the battery can
retain sufficient charge to crank an engine before it engages long term
maintenance mode.
During maintenance it “floats & tests” 30 minutes on, 30
minutes off, so the battery is always 100% ready, but never overcharged.
Note:
Battery needs to be disconnected from the vehicle for all
functions to work correctly.