
1) Hose off any mud and loose debris from the chain.
2) Spray on Maxima Clean-Up.
3) Allow 2-3 minutes for Clean-Up to breakup chain lube and any remaining debris.
4) Hose off Clean-Up with a heavy stream of water.
5) Repeat steps 2-4 if necessary.
6) Spray on Maxima MPPL to displace moisture and to put a thin layer of rust protection down.
7) Spray on Maxima Chain Wax or Synthetic Chain Guard.
8) Allow several minutes for chain lube to set up.
9)
Ride!
Product Review |
|
| Product: | - Maxima Chain Wax/Maxima Clean-Up/Maxima MPPL. |
| Test Duration: | - Long Term |
| Tested By: | - Steve Pennock of ATVPT |
| Location: | - Michigan |
| Machine: | - 06 Kymco 300 Mongoose |
| Review Date: | - 2006/2007 |
Safety: |
|
| A dry chain will lead to premature failure, and could cause an accident. | |
First Impressions: |
|
| The Maxima 3 step chain maintenance system is easy to apply, and is a proven product in the field. | |
Field Test: |
|
Let's face it, if you drive an ATV with a chain you have to do periodical
maintenance . The Maxima Chain Wax goes on easy and brings back life into your
chain.
We test our ATV's in most conditions , mud, snow, water, etc. and this
seems to take a toll on our equipment.
I like the way the chain wax goes on, and you can tell that it is on your
chain. We are currently running this lube on both of our Kymco test quads with
great results.
The chain wax from Maxima appears to wear very well in most of our driving
conditions, and we are very pleased with the results. |
|
Pros: |
|
|
|
|
|
|
|
|
|
|
Cons: |
|
|
|
|
|
|
|
|
|
Bottom Line |
|
|
|
Note: This product was provided by Maxima Racing Oils. |