Fastest way I know to install a stud in your track.
Easily reach's any location on your track.
Sturdy zinc plated construction.
Usually when you install the studs in your track you either
push them in, or pull them with a pair of pliers. We decided to go with the
Motion Pro Stud Installation Tool for our stud installation, and am I ever glad
The Motion Pro Stud Installation tool makes short work of
getting the stud into your track. You simply stick the stud in the hole, slip
the tool over the stud as shown in the pictures above, and press the handles
All you have to do next is install your backing plate &
nut and torque to spec, then off to the next stud.
This tool makes the stud installation easy, much faster, and
you get absolutely no blisters or hand fatigue from using this tool.
If you install studs in your track you will need this
The bottom line is I found by using the Motion Pro Stud
Installation Tool for my stud installation, the job went quickly, smoothly, and
effortlessly. I would highly recommend talking a look at the Motion Pro
Snowmobile Tools if you plan on studding your tracks. Just beware, because if
your friends find out you have these tools, you might find yourself busier then
you want to be.