ATVPT

All Terrain Vehicle Product Tests ATV Technical Magazine

Kawasaki Prairie 650/700 KEBC Clutch Fork Removal

If you want to improve your take offs from a dead stop. Get rid of the clutch fork. It is very easy to remove and install if needed. I chose to totally remove mine and install a DG-6 to get rid of the flashing 4x4 lights( This only happens if you unplug your KEBC Motor.).

I also installed a V-Force CVT Cover which is a very clean set up. You totally get rid of the KEBC Motor and oem CVT Cover. You can see all of this in the DG-6 installation photos.

KEBC Clutch Fork Removal


STEP 1 :
Dismount the Pulley Protector.

STEP 2 :
Remove the three Screws, the Electric Motor, and the Gasket Seal.



STEP 3 :
Remove the Snap Ring from the Brake Motor Level.

STEP 4 :
Remount the Gasket Seal, the Motor, and the three Screws.


STEP 5 :
Make sure that the electric motor is properly reconnected.

V-Force Cover on my Project ATV 04-700 Kawasaki Prairie

{ParagraphsSidebar}