www.ATVPT.com

•  DG’s .160 aluminum alloy.
• These guards shield important steering and suspension components from anything you can dish out.
• The Raptor A-Arm guards help protect you're a-arms from rock damage, by allowing your ATV to slide over rocks and obstacles without getting hung up.
• Direct bolt on to you're a-arms with supplied dg c-clamps.

Right A-Arm

Left A-Arm

• Position a-arm guards under each a-arm, 1 at a time.
• Install c-clamps over each a-arm, and line up with bolt hole in guard.
• Install each bolt through guard into c-clamp and leave slightly loose.
• Align a-arm guard so it doesn't interfere with any moving part and then tighten bolts.
• Check a-arm guards again after you have the bolts tightened, to see if there is any interference with moving parts.

My Impressions:

Pros:
Best in class aluminum c clamps, making for a very secure installation.

Heavy duty aluminum construction, for durability & long service life.

Excellent fit up, allowing for easy installation.

Cons:
None.

Bottom Line:
Installation of these DG A-Arm Guards was made easy because of the excellent fit up, and also the best in class c-clamps to securely attach them to the a-arms. I was impressed in the way they just fit in place on the a-arms, and bolted in perfectly.

My hat is off to the fabricators at DG for making  top shelf products.

Do you need a-arm guards on a sport atv, heck yes, if you plan on driving it like a sport atv!

I would highly recommend you taking a look at any product that DG has for your ATV or Side by Side. They have your ATV protected from front to rear, or bottom, with peace of mind that you need while you are the trail.