www.ATVPT.com
All Terrain Vehicle Product Tests ATV Technical Magazine
Cycle Country
Push Tube Quick Attach Kit
The Quick Attach will bolt right on to your existing Work Power 2000 Push Tubes. It will make attaching and detaching your plow a breeze. By adding the quick attach, you will no longer have to deal with lining up those tricky clevis pins. You simply keep your clevis pins attached to the mount and snap the quick attach into place. When taking you plow off, pull back on the spring loaded release levers and drive away.
Plow Mount Quick Attach
Part # - 10-0005
Push Tube Quick Attach Kit
The Quick Attach will bolt right on to your existing Work Power 2000 Push Tubes. It will make attaching and detaching your plow a breeze. By adding the quick attach, you will no longer have to deal with lining up those tricky clevis pins. You simply keep your clevis pins attached to the mount and snap the quick attach into place. When taking you plow off, pull back on the spring loaded release levers and drive away.
Features:
• Makes Installation & Removal quicker and easier than
ever before
• Patent Pending system firmly attaches (snaps) the Push Tube to the Mount Kit and releases with the flick of the lever
• Works with Universal Push Tube and Work Power V Push Tube
• Quickly and Easily bolts onto the Push Tube
• Sold in Pairs
• Patent Pending system firmly attaches (snaps) the Push Tube to the Mount Kit and releases with the flick of the lever
• Works with Universal Push Tube and Work Power V Push Tube
• Quickly and Easily bolts onto the Push Tube
• Sold in Pairs
Installation:
Installation is a breeze and takes just minutes.
Install quick release brackets over rear end of the push tubes where the old connect points are located.
Use the longer bolt to attach the manual lift stop, if you use the manual lift stop like I do.
Be careful when mounting the left bracket. You need to adjust the manual stop to the original position if you use the manual lift.
Stock versus the installed quick attach kit.
As you can see the jaws are easy to open and close.
Install your original pins in the mounting bracket before you install your plow.
I keep mine in a safe place when I am not using the plow. It is just something else to loose if left in when not in use.
This is so easy to attach to your ATV now. Just drive up over the push tubes and locate the rear of the push tubes in line with the mounting bracket pins.
Lift up you rear tubes, opening the quick connect as you do this, and snap the quick connect onto the mounting bracket pins.
To remove the plow, just reverse the procedure.
Installation is a breeze and takes just minutes.
Install quick release brackets over rear end of the push tubes where the old connect points are located.
 |  |  |  |
Be careful when mounting the left bracket. You need to adjust the manual stop to the original position if you use the manual lift.
 |  |
 |  |  |
 |  |
I keep mine in a safe place when I am not using the plow. It is just something else to loose if left in when not in use.
 |  |  |  |
Lift up you rear tubes, opening the quick connect as you do this, and snap the quick connect onto the mounting bracket pins.
To remove the plow, just reverse the procedure.
My Impressions:
Pros:
Having the new brackets makes it a breeze to attach your plow now.
Removing the plow is just as easy, with no pins to remove.
Hardware is top shelf, just like the Cycle Country Plow, and Push Tubes.
Cons:
None. The bracket works brilliant.
Bottom Line:
Hooking up your plow is really easy now with the Pushtube Quick Attach Kit installed. Just drive in over your plow like before, and lift up the plow's rear tubes and snap them on over the pins. removing the plow, just reverse the steps.
This is a great idea that Cycle Country came up with and it will make installing the plow way easier. I know I will be more prone to removing and hooking up the plow more often instead of just leaving the plow on all the time during the winter. The down side to leaving the plow on is you tend to not use your ATV for pleasure as much. Cycle Country as put the fun factor back in plowing for me.
Bottom line, If you have or will be using the Cycle Country plows, you need to install this kit too.
 |
ATVPT-ATVProductTests Copyrights 2009